Table of Contents
Advertisement
No. Page
09 WRR
SETTING
10 TIMECODE
106
Menu List
Item
Settings
TX* ATT LEVEL(*:
–
e)
channel number)
TX* LCF FREQ(*:
–
e)
channel number)
TX* SYSTEM
AUTO/
DELAY(*: channel
0.0ms~8.0ms
e)
number)
TC OUT
AUTO/GENE
DF/NDF
DF/NDF
(when the frame
frequency is set to
59.94i)
EXT-LK UBIT
INT/EXT
LTC UBIT
FIX/TIME
VITC UBIT
FIX/TIME
WATCH AUTO ADJ
OFF/ON
UBIT GROUP ID
000/101
Description
Sets the ATT level of the transmitter whose
signals are being received on the channel
selected by WRR CH SELECT (the
permissible setting range may vary depending
on the transmitter device).
Sets the Low Cut Filter frequency of the
transmitter whose signals are being received
on the channel selected by WRR CH
SELECT (the permissible setting range may
vary depending on the transmitter device).
When WRR DELAY COMP is set to ON, sets
the amount of audio delay for the channel
selected by WRR CH SELECT.
AUTO: Automatically adjusts the amount of
delay so that the delay in the audio
received from the wireless receiver is
zero.
0.0ms~8.0ms: Sets the amount of anticipated
wireless system delay, for cases in
several wireless systems are being used
over a device such as an audio mixer.
Selects the timecode signal output.
AUTO: Outputs the timecode generator
output during recording and outputs the
timecode reader output during playback.
GENE: Outputs the timecode generator
output during recording and playback.
Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non-drop frame mode
Sets whether the LTC UBIT setup value locks
to an INT or an EXT source when the
timecode is locked to an external source.
INT: Internal lock
EXT: External lock
Sets the data to be recorded in UBIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Sets the data to be recorded in UBIT of VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Matches the time of the internal clock with
the time data of the user bits of an external
timecode. Turns the automatic time correction
function of the internal clock on or off.
Selects the UBIT GROUP ID.
Advertisement
Table of Contents
