Table of Contents
Advertisement
No. Page
12 CAM
CONFIG 1
13 CAM
CONFIG 2
108
Menu List
Item
Settings
EMERGENCY EJECT OFF/ON
TAPE LED BRIGHT
OFF/LOW/
HIGH
TEST SAW SELECT
SAW/REC
COLOR BAR SELECT ARIB/100%/
75%/SMPTE
USER & ALL ONLY
OFF/ON
RM COMMON
OFF/ON
MEMORY
RM REC START
RM/CAM/PARA When an RM remote control unit is
HDSDI REMOTE I/F
OFF/CHARA/
G-TLY/R-TLY
SHT DISP MODE
SEC/DEG
Description
Sets whether the emergency cassette ejection
is permitted or not when an error is detected.
OFF: Emergency cassette ejection is
prohibited when the tape may be damaged
by ejecting the cassette.
ON: Emergency cassette ejection is permitted
when any type of error occurs.
Sets the brightness of the TAPE indicator, and
whether it lights or is off.
Selects the test signal.
Selects the HD color bar type.
Show only USER menu in the top menu.
Selects whether or not to share settings for
when a remote control unit is connected and
when the unit is used alone.
connected, selects which recording start/stop
buttons are enabled.
RM: remote control unit
CAM: camera
PARA: both
Selects whether to use the function that
enables recording control from this unit of an
external device connected to the HDSDI OUT
f)
connector of this unit.
Also selects the
indication that shows whether the external
device is recording.
OFF: Do not use the remote recording control
function.
CHARA: Use the function, and indicate by
the controlling external device indicator
in the viewfinder (see page 27).
G-TLY: Use the function, and indicate by the
TALLY indicator in the viewfinder.
R-TLY: Use the function, and indicate by the
REC (recording, red tally) indicator in
the viewfinder.
Note
When R-TLY is selected, the REC indicator lights
even when the unit is not recording.
Selects shutter speed display (seconds or
degrees).
Advertisement
Table of Contents
