Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zebex Z-6070
Summary of Contents for Zebex Z-6070
- Page 1 Z-6070 Hands-Free Dual-Laser Omnidirectional Scanner Service Guide Revision History Changes to the original manual are listed below: Version Date Description of Version Sept. 2, 2010 Initial release Aug 5, 2013 Updated to new parts and procedures...
-
Page 2: Preface
All trademarks mentioned herein, registered or otherwise, are the properties of their various respective owners. This manual is in A4 format. Please check your printer setting before printing it out. Z-6070 Service Guide 2 / 10... -
Page 3: Table Of Contents
ERVICE UIDE Table of Contents Preface..................................2 Important Notice ..................................2 Table of Contents................................3 Introduction ...................................4 Product Overview...................................4 Scanner Parts ..................................6 Take Apart ..................................7 Before You Start ..............................7 Important Instructions ..............................7 Tools to Prepare ..................................7 Z-6070 Service Guide 3 / 10... -
Page 4: Introduction
Furthermore, it is programmed with multiple beeper tones and barcode data edition function for different applications. Product Overview Front Scan Good Window Read Buzzer Button Interface Adjustable Connector Stand Z-6070 Service Guide 4 / 10... - Page 5 Power Link Connect the external AC/DC power adaptor into the power jack interface on the power link cable. And the interface connector provides the cable communication between the scanner and host terminal Z-6070 Service Guide 5 / 10...
-
Page 6: Scanner Parts
Shock absorbing rubber (OD12.0-ID6.0*8.0) 160-204100-060 4Pin Pitch 1.0mm, Wire to Board cable 521-014000-020 Self tapping screw,M3-20.0mm, round, Philip’s head 521-00B000-5R5 Self tapping screw, M1.7-5.5mm, round, Philip’s head 521-003000-8R0 Self tapping screw,M2-8.0mm, round, Philip’s head Z-6070 Service Guide 6 / 10... -
Page 7: Take Apart
Heed all warnings. Tools to Prepare • Philips screwdriver. Please follow these steps to take apart Z-6070. 1. Remove the 4 screws (521-014000-020）from the back case as illustrated. 2. Separeate the front case of the scanner. Z-6070 Service Guide 7 / 10... - Page 8 ERVICE UIDE 3. Remove the connector from the main board（circled in red）. 4. Remove the connector (circled in red）. 5. Remove the 4Pin Pitch 1.0mm, Wire to Board cable. Z-6070 Service Guide 8 / 10...
- Page 9 6. Remove the 3 Shock absorbing rubbers (circled in red) from the back case and remove the screw pointed by red arrow（521-003000-8R0）. 7. Remove the decorative panel from the back case. 8. Remove the 4 Shock absorbing rubbers and the 4 screws (521-00B000-5R5）illustrated in red arrows. Z-6070 Service Guide 9 / 10...
- Page 10 ERVICE UIDE 9. Separate the front case, dust cover, front case frame, shock absortbing rubbers, and the screws. Z-6070 Service Guide 10 / 10...