Dc-In Jack - Toshiba PORTEGE M300 Maintenance Manual

Personal computer

Hide thumbs Also See for PORTEGE M300:

Table of Contents

4 Replacement Procedures

4.22 DC-IN jack

Removing the DC-IN jack

To remove the DC-IN jack, follow the steps below and refer to figure 4-36.

1. Disconnect the DC-IN harness from the connector CN8800 on the system board and

Installing the DC-IN jack

To install the DC-IN jack, follow the steps below and refer to figure 4-36.

1. Connect the DC-IN harness to the connector CN8800 on the system board.

PORTEGE M300 Maintenance Manual (960-504)

Figure 4-36 Removing the DC-IN jack

Show Quick Links

Table of Contents