4.6 Keyboard
M2.0x3.0S
S-THIN FLAT BIND
or
M2.0x4.0B
LH STICK
6. Lift the upper side of the keyboard and turn it's face down on the palm rest.
7. Peel off the cover tape sticking over the slit for keyboard flexible cable.
8. Turning up the cover sheet, disconnect the keyboard flexible cable from the connector
CN3230 on the system board.
9. Pull out the keyboard flexible cable through the slit and remove the keyboard.
Cover tape
4-20
Speaker cover (L)
Figure 4-11 Removing the speaker covers
4 Replacement Procedures
Speaker cover (s)
PORTEGE M300 Maintenance Manual (960-504)
Slit
M2.0x3.0S
S-THIN FLAT BIND