Toshiba PORTEGE M300 Maintenance Manual page 267

4.10 Display assembly
10. Connect the speaker cables to the connector CN6180 on the system board.
11. Connect the touch pad cable to the connector CN3240 on the system board.
12. Arrange the wireless LAN antenna cables along the guide of base assembly and secure
them with insulators 1.
CAUTION: When arranging the wireless LAN antenna cables, make sure wireless LAN
antenna cables are not come out from the guide.
13. Arrange the bluetooth antenna cable along the guide of base assembly and secure all
antenna cables with glass tape 1.
CAUTION: When arranging the bluetooth antenna cable, make sure bluetoooth antenna
cable is not come out from the guide.
14. Secure the cover assembly and GND cable with the following screw.
M2.0x6.0B
?
NOTE: Be sure to secure the GND cable with the caulked side upward.
15. Secure the cover assembly with the following screws .
M2.0x6.0B
?
16. Turn the computer face down and secure the cover assembly with the following screws
from the bottom.
M2.0? 6.0B
?
M2.0? 4.0B
?
4-34
BIND screw
BIND screw
BIND screw
BIND screw
PORTEGE M300 Maintenance Manual (960-504)
4 Replacement Procedures
? 1
? 2
? 9 (Described "6" in the figure)
? 1 (Described "4" in the figure)