Toshiba PORTEGE M300 Maintenance Manual page 158

3.20 Only One Test
Subtest 06 Acceleration sensor
This subtest detects and corrects the each axis (X, Y, Z).
NOTE: Make sure that this subtest is executed on the following condition:
1. Flat desk with vertical plane to get the stability of machine.
2. Prevent the machine from shake or shock.
<Example>
Set the machine
against the vertical plane
with the Front upward
Flat desk
The figure below shows the name and position of each side.
Left side
(left)
3-46
Top
(heaven surface)
Back
Figure 3-1 Name and positions of each side
3 Tests and Diagnostics
Vertical plane
Right side
(right)
Front
PORTEGE M300 Maintenance Manual (960-504)