Optical Drive - Toshiba PORTEGE M300 Maintenance Manual

4.9 Optical drive

4.9

Optical drive

Removing an optical drive
To remove an optical drive, follow the steps below and refer to figures 4-15 and 4-16.
1. Turn over the computer and remove the following screws securing an optical drive
assembly.
M2.5? 10.0B FLAT BIND screw
?
M2.0? 4.0B
?
2. Push out an optical drive assembly by pressing it from the slot and remove it.
Optical drive
4-26
BIND screw
Figure 4-15 Removing an optical drive assembly
4 Replacement Procedures
? 1
? 1
M2.5x4.0B BIND
Slot
PORTEGE M300 Maintenance Manual (960-504)
M2.5x10.0B
FLAT BIND