Combination Switch - Mercedes-Benz 2013 SL Operator's Manual

To switch on the standing lamps: the
X
SmartKey is not in the ignition lock or it is
in position 0.
Turn the light switch to W (left-hand side
X
of the vehicle) or X (right-hand side of
the vehicle).

Combination switch

Turn signal
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow ; or ?.
Exterior lighting
High-beam headlamps
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To switch on the high-beam headlamps:
X
turn the SmartKey in the ignition lock to
position 2 or start the engine.
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
X
pressure point in the direction of
arrow :.
In the à position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The K indicator lamp in the instrument
cluster lights up when the high-beam
headlamps are switched on.
To switch off the high-beam
X
headlamps: move the combination switch
back to its normal position.
The K indicator lamp in the instrument
cluster goes out.
129
Z