Mercedes-Benz 2013 SL Operator's Manual page 439

Select a magazine tray to be filled by
X
turning cVd the COMAND controller and
press W to confirm.
or
Press a number key, e.g. j.
X
The DVD changer switches to the selected
magazine tray. You see the
Wait... message.
You then see the Please insert disc
<x> message.
Insert a disc into the disc slot with the
X
printed side facing upwards.
The DVD changer loads the disc into the
selected magazine tray. The
disc <x>... message appears.
i
It may take some time for the disc to be
loaded, depending on the type of disc. If no
disc is inserted for approximately 20
seconds, the display returns to the
magazine menu.
The DVD changer plays the disc if:
it has been inserted correctly.
R
it is a permissible type of disc.
R
Full magazine tray (eject function is
:
available)
Empty magazine tray (disc can be
;
inserted)
To exit the menu: press the V eject/
X
load button again or press the % back
button.
Please
or
Select
X
cVd the COMAND controller and press
W to confirm.
To fill empty magazine trays: press the
X
V load/eject button.
The magazine menu appears.
Select
X
You see the
COMAND switches to the next free
magazine tray. You then see the
insert disc <x>
i
Do not insert a disc into the magazine tray
until you have seen this prompt.
Insert a disc into the disc slot with the
X
printed side facing upwards.
You see the
Loading
Once the disc is loaded, the DVD changer
switches to the next empty tray. You see
the
Repeat this step until all trays are loaded.
X
The DVD changer plays the last disc you
loaded if it has been inserted correctly and
it is a permissible type.
Back by sliding VÆ and turning
Fill Empty Slots.
Please Wait...
message.
Please Wait...
Please insert disc <x>
Audio
437
message.
Please
message.
message.
Z