Hold Function - Mercedes-Benz 2013 SL Operator's Manual

because of its narrow width. The distance to
the vehicle in front will be too short.
Obstructions and stationary vehicles
DISTRONIC PLUS does not brake for
obstacles or stationary vehicles. If, for
example, the detected vehicle turns a corner
and reveals an obstacle or stationary vehicle,
DISTRONIC PLUS will not brake for these.
Crossing vehicles
DISTRONIC PLUS may mistakenly detect
vehicles that are crossing your lane.
Activating DISTRONIC PLUS at traffic lights
with crossing traffic, for example, could cause
your vehicle to pull away unintentionally.
Driving systems

HOLD function

Important safety notes
G
WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if:
there is a malfunction in the system or in
R
the voltage supply.
the HOLD function has been deactivated by
R
pressing the accelerator pedal or the brake
pedal, e.g. by a vehicle occupant.
the electrical system in the engine
R
compartment, the battery or the fuses have
been tampered with.
the battery is disconnected
R
There is a risk of an accident.
If you wish to exit the vehicle, always turn off
the HOLD function and secure the vehicle
against rolling away.
! If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes
automatically in certain situations. To
prevent damage to the vehicle, deactivate
DISTRONIC PLUS and the HOLD function in
the following or other similar situations:
when towing the vehicle
R
in the car wash
R
Deactivate the HOLD function (
General notes
The HOLD function can assist the driver in the
following situations:
when pulling away, especially on steep
R
slopes
when maneuvering on steep slopes
R
when waiting in traffic
R
The vehicle is kept stationary without the
driver having to depress the brake pedal.
The braking effect is canceled and the HOLD
function deactivated when you depress the
accelerator pedal to pull away.
195
page 196).
Y
Z