Memory Function - Mercedes-Benz 2013 SL Operator's Manual

Memory function

124
the exterior mirror, the rear wheel and the
curb should be visible.
Press memory button M ? and one of the
X
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat
X
the steps.
Calling up a stored parking position
setting
Button for the driver's side exterior mirror
:
Button for the front-passenger side
;
exterior mirror
Adjustment button
=
Memory button M
?
Turn the SmartKey to position 2 in the
X
ignition lock.
Adjust the exterior mirror on the front-
X
passenger side using button ;.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
if you press button : for the exterior
R
mirror on the driver's side
Memory function
Storing settings
G WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic
conditions by the seat moving of its own
accord, and as a result cause an accident.
Adjust the seat electrically (
X
On the driver's side, adjust the steering
X
wheel ( page 120) and the exterior mirrors
Y
( page 122).
Y
Press memory button M and one of the
X
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.
Calling up a stored setting
Press and hold the relevant storage
X
position button 1, 2 or 3 until the seat,
steering wheel and exterior mirrors are in
the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
page 116).
Y