Entering An Intermediate Stop - Mercedes-Benz 2013 SL Operator's Manual

Select Using Geo-Coordinates
X
press W to confirm.
An entry menu appears.
You can now enter the latitude and longitude
coordinates.
To change a value: turn cVd the
X
COMAND controller.
To move the mark within the line: slide
X
XVY the COMAND controller.
To move the mark between the lines:
X
slide ZVÆ the COMAND controller.
To confirm the value: press W the
X
COMAND controller.
i
If the selected position is outside the
digital map, COMAND uses the nearest
digitized road for route calculation. You will
see the The coordinates are off the
map message. If the selected position is
located over a body of water, you will see
the message: The destination is in
a body of water. Please select
another destination.
Intermediate stop

Entering an intermediate stop

To switch to navigation mode: press the
X
Ø function button.
To show the menu: press W the COMAND
X
controller.
Select Dest. in the navigation system
X
menu bar by turning cVd the COMAND
controller and pressing W to confirm.
Intermediate stop categories
and
Option 1: the route does not have an
intermediate stop.
Select Stopover
X
Select a category; see option 2.
X
Option 2: the route already has an
intermediate stop.
Select Change Stopover
X
confirm.
Example: search results for the chosen category
COFFEE SHOP
Highlighted stopover, current distance
:
from vehicle position and name of
stopover
To select a category: select a category by
X
turning cVd the COMAND controller and
press W to confirm.
COMAND first searches in the selected
category for destinations along the route.
If there are no destinations available there,
COMAND searches for destinations within
a radius of 60 miles(100 km) of the vehicle
position.
Navigation
and press W to confirm.
and press W to
327
Z