Information In The Display - Mercedes-Benz 2013 SL Operator's Manual

Select Default Symbols,
X
Symbols or No Symbols.
If you select Personal
list appears.
To switch the symbol display on/off:
X
select a POI by turning cVd the COMAND
controller and press W to confirm.
Depending on the previous state of the
symbols, they will either be shown O or
hidden ª. You can switch on the symbol
displays for more than one point of interest.
To switch all personal symbols on/off:
X
select All and press W to confirm.
Depending on the previous status of the
symbols, they will either be shown O or
hidden ª.
If the function is switched on O, the
individual POIs are grayed out and the
previously selected settings remain
unchanged.
If the function is switched off ª, you can
reselect the individual POIs. They show the
most recently selected settings.
i
The list shows all symbols that are
contained on the digital map across all
countries. However, not all points of
interest are available in all countries. As a
result, certain point of interest symbols
may not be displayed on the map, even if
the symbol display is switched on.
To exit the menu: press the % back
X
button.
Selecting map information
Custom
Map information in the display
Symbols, the POI
During route guidance, you can have map
information shown at the bottom edge of the
display.
X
X
X
X
X
X
Arrival time/distance to destination display
:
;
=
?
To show the menu: press W the COMAND
controller.
Select Navi in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Map Settings
confirm.
The map settings menu appears.
Select Text Information On Map
press W to confirm.
A # dot indicates the current setting.
Select Arrival Time /
Current Street, Geo-coordinates
None and press W to confirm.
To exit the menu: slide XVY the COMAND
controller.
Icon for destination O
Distance to destination
Icon for estimated time of arrival Ñ
Estimated time of arrival Ñ
Navigation
365
and press W to
and
Distance,
or
Z