Warning Lamp; Replacing Bulbs; Crash-Responsive Emergency Lighting - Mercedes-Benz 2013 SL Operator's Manual

Windshield wipers
134
Manual interior lighting control
To switch the interior lighting on: set the
X
switch to the c position.
To switch the interior lighting off: set the
X
switch to the | or (if the door is closed)
to the center position.
To switch the reading lamps on/off:
X
press the p button.

Crash-responsive emergency lighting

The interior lighting is activated automatically
if the vehicle is involved in an accident.
To switch off the crash-responsive
X
emergency lighting: press the hazard
warning lamp button.
or
Lock and then unlock the vehicle using the
X
SmartKey.

Replacing bulbs

G
DANGER
Xenon bulbs carry a high voltage. You can get
an electric shock if you remove the cover of
the Xenon bulb and touch the electrical
contacts. There is a risk of fatal injury.
Never touch the parts or the electrical
contacts of the Xenon bulb. Always have work
on the Xenon bulbs carried out at a qualified
specialist workshop.
The front and rear lamps of your vehicle are
equipped with either Xenon or LED bulbs. Do
not replace the bulbs yourself. Contact a
qualified specialist workshop which has the
necessary specialist knowledge and tools to
carry out the work required.
Bulbs and lamps are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times.
Have the headlamp setting checked regularly.
Windshield wipers
Switching the windshield wipers on/
off
! Do not operate the windshield wipers
when the windshield is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windshield can
scratch the glass if wiping takes place when
the windshield is dry.
If it is necessary to switch on the windshield
wipers in dry weather conditions, always
use washer fluid when operating the
windshield wipers.
! If the windshield wipers leave smears on
the windshield after the vehicle has been
washed in an automatic car wash, wax or
other residues may be the reason for this.
Clean the windshield using washer fluid
after washing the vehicle in an automatic
car wash.
! Intermittent wiping with rain sensor: due
to optical influences and the windshield
becoming dirty in dry weather conditions,
the windshield wipers may be activated
inadvertently. This could then damage the
windshield wiper blades or scratch the
windshield.
For this reason, you should always switch
off the windshield wipers in dry weather.
Combination switch
$ Windshield wiper off
1
Ä Intermittent wipe, low (rain sensor
2
set to low sensitivity)