Operating The Touch Screen; Plug And Play (Microsoft Windows 7 And Windows Vista); Touch Software Installation For Microsoft Windows Xp; Installing The Software From The Cd - HP LD4200tm User Manual

5

Operating the Touch Screen

Plug and Play (Microsoft Windows 7 and Windows Vista)

When you connect the USB cable between the display and a media player/computer with Microsoft
Windows 7 or Windows Vista operating system, the device will be found and the Windows touch
drivers will be installed automatically by the Windows operating system. The software may take a few
minutes to install and a message will be displayed on the lower right corner of the screen indicating
that the Windows touch drivers have been installed successfully. Once you install the Windows touch
driver, you can select, launch, and drag objects using the touch screen gestures. To make a
selection, touch the screen. The touch driver installation program will not install drivers for Microsoft
Windows Vista or Microsoft Windows 7 operating system. Microsoft plug-and-play touch drivers are
already included in those operating systems for these displays.
NOTE: Refer to
instructions on connecting the USB cable.
To verify that the touch driver is installed, on the Windows 7 desktop go to Start > Control Panel >
System and Security > System and ensure that Pen and Touch Input Available with 2 Touch
Points is listed in the System section.

Touch Software Installation for Microsoft Windows XP

For the touch screen to function properly when using Microsoft Windows XP, you must install the HP
touch driver by using the touch driver installation program on the CD included with your display.
The touch driver installation program will not install drivers for Microsoft Windows Vista or Microsoft
Windows 7 operating systems. The plug-and-play touch drivers are already included in these
operating systems for the HP LD4200tm.
NOTE: There are no Windows Vista or Windows 7 touch drivers on the CD included with the display
and you can not install the Microsoft Windows XP driver if you are using either Windows Vista or
Windows 7.

Installing the Software from the CD

The CD that comes with LD4200tm display contains files that you can install to communicate with the
touch screen and use the touch screen with Windows applications.
To install the touch driver from the CD:
1. Insert the CD in the media player/computer.
2. Click Install Touch Driver. To continue, click Next and follow the instructions on the screen to
install the touch driver.
3. After setup has finished installing the touch driver, select Yes to restart and click Finish.
4. Connect the Touch screen display cable (USB) to your PC.
ENWW
Connecting the USB (Universal Serial Bus) Cable on page 18
Plug and Play (Microsoft Windows 7 and Windows Vista)
for illustrated
31