HP LD4200tm User Manual page 33

Icon
ENWW
Main Menu Submenu
Advanced
Aspect Ratio
Picture Reset
Screen
Description
Selects the following screen color adjustment settings:
●
Gamma - set your own gamma value. On the display,
high gamma values display whitish images and low
gamma values display high contrast images.
●
Film Mode - function works in the following mode: AV,
Component 480i. When you watch a movie, this function
adjusts the set to the best picture appearance.
●
Black Level - function works in the following mode: AV
(NTSC), HDMI/DVI adjusts the contrast and the
brightness of the screen using the black level of the
screen.
●
NR - removing the noise up to the point where it does not
damage the original picture.
Selects the image size of the screen to:
●
16:9 - widescreen mode.
●
Just Scan - allows you to enjoy the transmitted data fully
without any images cut off. (This menu is activated only
in 720p, 1080p and 1080i in Component mode.)
●
Original - the aspect ratio is not adjusted from the
original. It is set by the program being watched.
●
4:3 - the picture format is 4:3 aspect ratio.
●
1:1 - the aspect ratio is not adjusted from the original.
Used in PC mode. (Only HDMI/DVI PC, RGB PC)
●
14:9 - programs are viewed normally in 14:9 with black
bars added to the top and bottom. The 4:3 programs are
magnified on the top/bottom and left/right sides.
●
Zoom1,2 - 4:3 programs are magnified until they fill the
16:9 screen. The top and bottom will be cut off.
Returns the Picture Mode, Color Temperature, and Advance
menu settings to the default factory settings.
Adjusts the screen video to:
●
Auto config (RGB PC Input only): This button is for the
automatic adjustment of the screen position, clock and
phase. This function is available for analog signals only.
●
Manual Config: If the picture isn't clear after auto
adjustment and characters are still trembling, adjust the
picture phase manually using the following functions:
◦
Clock - minimizes any vertical bars or strips visible
on the screen background. The horizontal screen
size will also change. This function is available for
analog signals only. The clock function is not
available in Component, HDMI/DVI/AV.
◦
Phase - adjusts the focus of the display. This item
allows you to move any horizontal noise and clear
or sharpen the image of characters. This function is
available for analog signals only. The phase
function is not available in Component, HDMI/DVI/
AV.
◦
H-Position - moves the screen position horizontally.
Using the On-Screen Display Menu 25