Operating The Touch Screen; Using The Touch Function - HP elitedisplay e230t User Manual

3

Operating the touch screen

Using the touch function

NOTE: Touch functions are Windows 10 certified.
NOTE: Before using the touch function, make sure the USB cable is connected and the operating system is
started on your computer.
NOTE: After Windows starts, you can use touch gestures directly on the monitor screen instead of using a
mouse to guide a screen cursor. Simply touch the screen with either a rubber-tipped touch pen or your finger.
NOTE: The touch function will be disabled when the monitor and computer enter a low power Sleep state.
When the monitor and computer are left unattended for a long period of time, the power saving feature may
initiate the Sleep state. The computer and monitor power lights change to an amber color. You cannot wake
the monitor by touching the screen. To wake the monitor and computer from the Sleep state and enable the
touch function, lightly touch the keyboard or mouse.
Touch Gesture
20 Chapter 3 Operating the touch screen
Name Function
Tap/Double-tap Open an app. To quickly return to the Start screen, tap the Start button
in the lower-left corner of the screen.
Display the Start menu. On the touch screen, tap the Desktop app, and
then press and release the Start button.
Two-finger tap Same function as right-clicking with a mouse.