HP LD4200tm User Manual page 20

4. Connect the AC power cord to the power connector (1) on the rear of the display and the other
end to an electrical outlet (2).
WARNING!
• Do not disable the power cord grounding feature. The grounding plug is an important safety
feature.
• Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
• Disconnect power from the product by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one
may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from
the electrical outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper
workstation, setup, posture, and health and work habits for computer users, and provides
important electrical and mechanical safety information. This guide is located on the Web at
http://www.hp.com/ergo
Figure 3-16
5. Turn on the power to the display by pressing the power button (1) on the rear of the display.
Figure 3-17
6. Turn on the media player/computer.
7. Select an input signal.
Press the INPUT button on the remote control to select the input signal. Press the SET button to
save your change.
12 Chapter 3 Setting Up the Display
To reduce the risk of electric shock or damage to the equipment:
and/or on the documentation CD, if one is included with the display.
Connecting the Power Cord
Power Button
ENWW