Connecting To External Devices; Connecting To The Computer - HP LD4200tm User Manual

Connecting to External Devices

Connecting to the Computer

1. Be sure the display, media player/computer and all attached devices are turned off.
2. Connect the signal input cable:
a. For analog operation, connect the VGA (D-sub) signal cable to the RGB IN (1) connector
on the rear of the display and the other end to the VGA connector (2) on the media player/
computer.
NOTE:
adapter (3).
Figure 3-13
b. For digital operation, connect an HDMI cable (not included) to the HDMI/DVI (1) connector
on the rear of the display and the other end to the HDMI connector on the player, or if the
player has a DVI video output connector, use an HDMI to DVI cable (not included) to
connect the HDMI connector to the HDMI/DVI connector on the back of the display (1) and
the DVI connector to the DVI video output connector (2) on the media player/computer.
NOTE:
compliance for this product.
Figure 3-14
3. Connect the audio cable (sold separately) to the Audio (RGB/DVI) (1) connector on the rear of
the display and the other end to the line out jack (2) on the media player/computer.
Figure 3-15
NOTE:
audio cable. As shown in the image, fit the ferrite core to the audio cable. The ferrite core needs
to be separated from the mold by 5 centimeters.
ENWW
If connecting to a Mac media player/computer, use the standard Macintosh
Connecting the VGA Signal Cable
Use shielded signal interface cables with ferrite cores to maintain standard
Connecting the HDMI to DVI Signal Cable
Connecting the Audio
The ferrite core can be used to reduce electromagnetic waves when connecting an
Connecting to External Devices 11