Connecting Video Input - HP LD4200tm User Manual

Connecting Video Input

1. Connect the video cable (sold separately) as shown in the following illustration, and then
connect the power cable.
a. When connecting with a BNC cable (1), connect the input terminal to the display and VCR/
DVD receiver.
b. When connecting with an S-Video cable (2), connect the S-Video input terminal to the
display and VCR/DVD receiver to watch high image quality movies.
Figure 3-19
2. Select an input signal.
Press the INPUT button on the remote control to select the input signal. Press the SET button to
save your change.
Or, press the SOURCE button on the back side of the display panel. Press the AUTO/SET
button to save your change.
a. When connecting with a BNC cable, select AV from the Input menu.
b. When connecting with an S-Video cable, select AV from the Input menu.
NOTE:
input has a priority.
14 Chapter 3 Setting Up the Display
Connecting with the BNC and Audio Cables to VCR/DVD Receiver
When the BNC cable is connected simultaneously with S-Video cable, the S-Video
ENWW