Table of Contents
Advertisement
High-Bandwidth Digital Content Protection (HDCP)
Your monitor supports HDCP and can receive high-definition content. High-definition content is
available in many sources, such as Blu-ray Disc devices or HDTV air or cable broadcasts. If you
do not have an HDCP-enabled monitor, a blank screen or a lower resolution picture appears when
playing high-definition protected content. Your computer graphics card and monitor must both
support HDCP to display protected content.
Turning on the Monitor
1.
Press the power button on the computer.
2.
Press the power button on the monitor.
CAUTION:
on screen for a prolonged period of time (at least 12 consecutive hours of non-use). To avoid
burn-in image damage on the monitor screen, activate a screen saver application or turn off the
monitor when it is not in use for a prolonged period of time. Image retention is a condition that
might occur on all LCD screens. Monitors with a burned-in image are not covered under HP
warranty.
When the monitor is powered on, a Monitor Status message appears for 5 seconds. The message
shows which input is the current active signal, the status of the auto-switch source setting (On or
Off), the default source signal, the current preset display resolution, and the recommended preset
display resolution.
HP Watermark and Image Retention Policy
This monitor model is designed with IPS (In-Plane Switching) display technology which provides
ultra-wide viewing angles and advanced image quality. IPS monitors are suitable for a wide variety
of advanced image quality applications. This panel technology, however, is not suitable for
applications that exhibit static, stationary or fixed images for long periods of time without the use of
screen savers. These types of applications may include camera surveillance, video games,
marketing logos, and templates that are displayed on the screen for a prolonged period of time.
Static images may cause image retention damage that could look like stains or watermarks on the
monitor's screen.
Monitors in use for 24 hours per day that result in image retention damage are not covered under
the HP warranty. To avoid image retention damage, always turn off the monitor when it is not in
use or use the power management setting, if supported on your system, to turn off the display
when the system is idle.
Selecting Video Input Connectors
The input connectors are:
•
VGA (analog)
•
DisplayPort connector (digital)
•
HDMI connector (digital)
12
Chapter 3
Setting Up the Monitor
Burn-in image damage might occur on monitors that display the same static image
ENWW
Advertisement
Table of Contents
