A security cable provision is available on the rear of the monitor to help prevent theft. The cable and
lock are available separate and can be purchased from HP.
Figure 3-22
Connecting Video Input
1.
Connect the video cable (not included) as shown in the following illustration, and then connect the
power cable.
a.
When connecting with a BNC cable (1), connect the input terminal to the monitor and VCR/
DVD receiver.
b.
When connecting with an S-Video cable (2), connect the S-Video input terminal to the monitor
and VCR/DVD receiver to watch high image quality movies.
Figure 3-23
2.
Select an input signal.
ENWW
VESA Mounting Holes
Connecting with the BNC and Audio Cables to VCR/DVD Receiver
Connecting to External Devices
15