Daikin F-Series Service Manual page 162

Si04-703A
Step
5. Remove the control PCB.
Undo the 2 hooks on
1
the lower side, and then
the 2 hooks on the
upper side.
Remove the control
PCB.
Control PCB (indoor
2
unit)
S1: connector for the
fan motor
S21: HA
S26: connector for
buzzer PCB
thermistor
S28: connector for
signal receiver
PCB
S32: connector for the
heat exchanger
thermistor
6. Remove the swing motor
for horizontal blades.
1 Remove the screw of
the swing motor.
Removal Procedure
Procedure
Indoor Unit
Points
151