Table of Contents
Advertisement
Basic Operation
Viewing Live Images via
Front Panel Control
This section describes the procedures for viewing live images by
using the front panel of this unit.
Memo :
● To operate by connecting a mouse (sold separately), refer to
[Viewing Live Images via Mouse Control] (A Page 36).
[LIVE/BROWSE] Button
[SELECT] Button
Keypad
WARNING
LIVE/BROWSE
OPERATE
ALARM
HDD
SELECT
LOCK
REC CONTROL
PTZ/PRESET
SERIAL
CANCEL
ZOOM OUT
ZOOM IN
ENTER
[FUNCTION]
Button
[15/ZOOM IN] Button
[14/ZOOM OUT] Button
[PTZ/PRESET] Button
[REC CONTROL] Button
[LIVE/BROWSE] Button
[SELECT] Button
Keypad
[FUNCTION]
Button
[ZOOM IN/ENTER] Button
[ZOOM OUT/CANCEL] Button
[PTZ/PRESET] Button
[REC CONTROL] Button
Displaying the [Live] Screen
1
Press the [LIVE/BROWSE] button when the
wallpaper *1 or main menu *2 screen is
displayed.
*1 Wallpaper Screen
● Press the [LIVE/BROWSE] button when the [Browse]
screen is displayed.
● Press the button to toggle between the [Live] and [Browse]
screens.
VR-N1600U/E
FUNCTION
SEARCH
KEY
ALARM CLEAR
REC/STOP
STOP(PB)
PLAY
[ALARM CLEAR] Button
VR-N900U
[ALARM CLEAR] Button
*2 Main Menu Screen
[Live] Screen
Select a view
For details on the view settings, refer to [Screen Setup]
(A Page 60).
1
REV
FWD
Press the [PTZ/PRESET] button to switch the
[PTZ/PRESET] indicator to the blinking mode
SKIP
● Press the [PTZ/PRESET] button to switch the [PTZ/
PRESET] indicator between the lit and blinking modes.
2
Press the [15/ZOOM IN](ZOOM IN/ENTER) and
[14/ZOOM OUT](ZOOM OUT/CANCEL) buttons
to select a view
Note :
● Do not switch the view frequently within a short time interval.
● When live images do not appear on VN-C625U/VN-C655U, set
the password for connecting VN-C625U/VN-C655U on the
camera unit as well as this unit again. For details on the setting
procedures, refer to the [INSTRUCRTIONS] of the camera in
use and procedures for setting the root password on the [Edit
device settings] screen in this manual (A Page 87).
● The audio setting is restored to No Audio Sources when you
return from the setting screen to [Live]. Select the parameters
again.
Select a Camera
Select the camera image that you want to view as follows.
1
Press the [SELECT] button
● The [SELECT] indicator lights up.
2
Enter the camera number with the keypad
● Enter using the [1] to [16] keys in the case of VR-N1600U/
E, and [0] to [9] in the case of VR-N900U.
Memo :
● You can specify a camera number between 10 to 19 by pressing
[10/0] followed by a number from [10/0] to [9]. (VR-N1600U/E)
● You can specify a camera number between 10 to 19 by pressing
[0] followed by a number from [0] to [9]. Numbers from 20 cannot
be selected. (VR-N900U)
● When you have selected a camera, the blue bar at the top
of each live image changes to a lighter blue tone.
● Each bar comes with a tri-color square indicator, which
indicates the following features, as well as characters that
indicate the operating status of the camera.
NVR Viewer
[Browse] Screen
Advertisement
Table of Contents
