Table of Contents
Advertisement
Item
A
IP Lease
B
IP Lease Parameter
Start Address
Unit
Subnet Mask
Gateway
DNS Server
Primary
Secondry
Domain Name
C
Lease Time Limit
D
Client
Preset Values
Enable
For configuring the function to assign IP addresses to each network
camera.
Disable
Memo :
● In order to assign an IP address of the network camera using the
IP Lease feature, you need to enable the DHCP of the network
camera. For procedures to enable the DHCP of the network
camera, refer to the [INSTRUCRTIONS] of the network camera.
● If a network uses a multiple number of this product, enable [IP
Lease] only for one unit. Select Disable if a DHCP server is
operating on the same network. When the [IP Lease] is enabled for
two or more devices at the same time, the IP address may change
to a static address, and cause malfunction of the cameras.
192.168.0.100
For specifying the first IP address to be assigned to the cameras.
20Units
For selecting the number of IP addresses to be assigned to the
cameras. The selected number of IP addresses will be assigned
1Unit to 99Units
starting from the first IP address.
255.255.255.0
For specifying the subnet mask for the cameras.
192.168.0.254
For specifying the gateway for the cameras.
192.168.0.253
For specifying the primary DNS for the cameras.
192.168.0.252
For specifying the secondary DNS for the cameras.
^
For specifying the domain name for the cameras.
No
For specifying the valid period of the IP address assigned to the
cameras.
Yes
If Yes is selected, you can set the lease time in units of hours.
(Setting value: 1 hour to 99 hours)
Only Camera
For selecting whether to apply restrictions on the device when
assigning the IP address. If Only Camera is selected, IP address
Any Client
will only be assigned to the corresponding camera. If Any Client is
selected, IP address will be assigned to all devices.
Description
Reference
Page
A Page 113
^
^
^
Advertisement
Table of Contents
