JVC LST0728-001B Instructions Manual page 83

Other Settings
Item
B
Day and Time Properties
Automatically
synchronize with an
Internet server
Server
NTP Polling Interval
Date
Time
Time Zone
C
Volume Properties
Device Volume
D
LOAD configuration
E
SAVE changes
F
CANCEL changes
Preset Values
To synchronize the time with the Internet time server or to specify the date and
time manually, click [Update Now].
Select check box Select this check box to synchronize the time with the Internet time server.
Do not select
Note :
● You cannot specify the date and time manually when this box is selected. The
check box
● The date and time properties are not enabled until you have clicked the
● Changing the time setting may prevent normal playback of recordings made at
● Changing the Time field of the time setting when operations are in progress
^
Enter the address of the Internet time server.
Note :
● Connect the time server to the LAN2 network.
^
For specifying the time interval (in minutes) for synchronizing with the Internet
time server.
Enter this field when you are specifying the date manually.
Memo :
● The [Day and Time Properties] settings are not enabled until you have clicked
● Changing the time setting may prevent normal playback of recordings made at
^
● Changing the hour value of the hour/minute/second setting when operations
VR-1600U: For specifying the time zone.
(GMT-05:00)
Note :
Eastern Time
● Make sure that the date and time that you specify does not overlap with any
VR-1600E:
● If the specified time zone is incorrect, the system may not run at the correct
(GMT) Greenwich
Mean Time
● When the time zone is altered, press the [LIVE/BROWSE] while holding down
Center position Adjust the volume using the slider bar.
^
Reads the preset configuration files and displays them on the screen.
^
Exits after entries and the selected content are configured to the system.
Manual update of time is disabled. To update the time manually, go to the [Day
and Time Properties] item C.
^
Exits without saving all entries and selected settings.
settings in the boxes cannot be changed.
[Update Now] button.
the same time as a result.
may prevent normal display of live images. In this case, reboot this unit.
the [Update Now] button.
the same time as a result.
are in progress may prevent normal display of the live images. In this case,
reboot this unit.
previous recorded data.
time after synchronizing with the Internet time server.
the [FUNCTION] button to reboot the NVR Viewer.
Description