Table of Contents
Advertisement
Language Setting
This option enables you to specify the language you want to use.
Memo :
● The functions and GUI (graphical user interface) are the same
as the [Selecting a language] (A Page 23) screen that is
displayed when this unit is first switched on.
1
Exit NVR Viewer
2
Select [Language Setting] from the main menu
● The [Language Setting] screen appears when the NVR
Viewer is switched on for the first time.
3
Select a language
● Click on the [Language Selection] pull-down tab and
select the language you want to use.
4
Click the [OK] button
● Click the [OK] button to enable your selection. The system
will reboot when the language setting is changed.
[Language Selection] Screen
Note :
● Specify the language settings immediately after this unit has
started up.
● When language setting is complete, the device automatically
reboots. It may take about five minutes to exit the settings.
● Set the language after shutting down the NVR Viewer.
● Never turn off the power while setting the language.
3
4
Advertisement
Table of Contents
