Basic Operation
Viewing Live Images via
Front Panel Control
This section describes the procedures for viewing live images by
using the front panel of this unit.
Memo :
● To operate by connecting a mouse (sold separately), refer to
[INSTRUCRTIONS].
[LIVE/BROWSE] Button
[SELECT] Button
Keypad
[FUNCTION]
Button
[ZOOM IN/ENTER] Button
[ZOOM OUT/CANCEL] Button
[PTZ/PRESET] Button
[REC CONTROL] Button
Displaying the [Live] Screen
1
Press the [LIVE/BROWSE] button when the
wallpaper *1 or main menu *2 screen is
displayed.
*1 Wallpaper Screen
● Press the [LIVE/BROWSE] button when the [Browse]
screen is displayed.
● Press the button to toggle between the [Live] and [Browse]
screens.
[Live] Screen
[ALARM CLEAR] Button
*2 Main Menu Screen
NVR Viewer
[Browse] Screen
Select a view
For details on the view settings, refer to [INSTRUCRTIONS].
1
Press the [PTZ/PRESET] button to switch the
[PTZ/PRESET] indicator to the blinking mode
● Press the [PTZ/PRESET] button to switch the [PTZ/
PRESET] indicator between the lit and blinking modes.
2
Press the [ZOOM IN/ENTER] and [ZOOM OUT/
CANCEL] buttons to select a view
Note :
● Do not switch the view frequently within a short time interval.
● When live images do not appear on VN-C625U/VN-C655U, set
the password for connecting VN-C625U/VN-C655U on the
camera unit as well as this unit again. For details on the setting
procedures, refer to the [INSTRUCRTIONS] of the camera in
use and procedures for setting the root password on the [Edit
device settings] screen in this manual.
● The audio setting is restored to ANo Audio SourcesB when you
return from the setting screen to [Live]. Select the parameters
again.
Select a Camera
Select the camera image that you want to view as follows.
1
Press the [SELECT] button
● The [SELECT] indicator lights up.
2
Enter the camera number with the keypad
● Enter using the [0] _ [9] keys.
Memo :
● You can specify a camera number between 10 _ 19 by pressing
[0] followed by a number from [0] _ [9]. Numbers from 20 cannot
be selected.
● When you have selected a camera, the blue bar at the top
of each live image changes to a lighter blue tone.
● Each bar comes with a tri-color square indicator, which
indicates the following features, as well as characters that
indicate the operating status of the camera.
15