Table of Contents
Advertisement
Applications
Camera Input/Output Port
and Events (continued)
Specifying an Output
1
Select the camera for specifying the event from
the [Defined events] list on the [I/O Setup]
screen
2
Click the [Add new output event...] button
● The [Add New Output] screen appears.
[Add new output] Screen
3
Specify the output connection destination,
output holding time, and output name
Item
A
External
Displays the device name for which
output is specified. (This is a read-only
output
field.)
connected to
B
Output
For selecting which destination to
connect the output to.
connected on
C
Keep output
For specifying the output holding time in
units of 1/10 seconds or seconds.
for
D
External
For specifying a name for the output.
output name
Memo :
● The following characters cannot be
E
Test Output
Click this to perform a test on the output
settings.
1
2
Description
used as part of the event name.
< > & ^8217 ^8220 \ / : * ? | [ ]
Note :
● The [Add new output event...] button is disabled if there is no
output available for use by the network camera.
[Advanced] Screen
The [Advanced] screen enables you to specify network settings for
handling events.
1
Click the [Advanced...] button on the [I/O Setup]
screen
● The [Advanced] screen appears.
[I/O Setup] Screen
A
B
C
D
E
[Advanced] Screen
2
Specify the following items.
Item
A
Ftp Server
Port
B
Alert Port
C
SMTP
Port
A
B
C
D
Description
For specifying the port number to use for
sending event information from the device to
the surveillance system via FTP. (Specify a
number between 1 to 65535.)
For specifying the port number to use for
handling warnings related to events, including
generic events. (Specify a number between 1
to 65535.)
For specifying the port number to use for
sending event information from the device to
the surveillance system via SMTP. (Specify a
number between 1 to 65535.)
Click
Advertisement
Table of Contents
