Setting Copy; Password - JVC LST0728-001B Instructions Manual

Applications
Event Audio Settings (VR-
N1600U/E) (continued)

Setting Copy

This feature copies the settings of event audio associated with an
event (audio file name, destination of transmitted audio file, number
of deliveries) to another event.
1
Select the event to copy settings to (existing
settings are overwritten) from the [Audio playing
for] list on the [Event Audio Setting] screen
2
Click [Setting copy]
● The [Setting copy] screen appears.
Item
A Source
Select from the list the event to copy settings
from.
event-
neme:
B Copy
Click the [Copy] button to copy the settings.
After copy is complete, press the [Renew]
button on the [Event Audio Setting] screen to
enable the copied settings.
C Cancel
Closes the [Setting copy] screen without
executing copy.
A
B
C
Description

Password

Enter the password to establish connection with the camera that
supports bidirectional audio. Audio transmission to the camera that
supports bidirectional audio will not be executed if the password
entered is incorrect.
Memo :
● To enter the password, you need to ensure that communication
of the selected camera on the network is enabled.
1
Select a camera from the [Audio playing for] list
on the [Event Audio Setting] screen
Memo :
● To select a camera, click on the camera name to highlight the
display. Note that selecting the check box does not select the
camera.
2
Click [Password setting]
● The [Password setting] screen appears.
A
B
C
Item
A Camera
The name of the camera for entering the
password appears. You cannot alter the
name
[Camera name].
B IPaddress
The IP address of the camera for entering the
password appears. You cannot alter the
[IPaddress].
C Password
For entering the camera password. The
default password appears during the first
entry.
Memo :
● There is no default password for cameras
manufactured by AXIS. When using AXIS
cameras, you need to specify a camera
password in advance. For details, refer to
the [Instruction Manual] of the camera.
D OK
Authenticates the entered password. If
authentication is successful, the setting is
saved and the [Password setting] screen
closes automatically.
If the password entered is incorrect, or if
access to the camera fails such as when the
camera is not connected to the network, an
error message appears and the password
setting will not be saved.
E Cancel
Cancels password authentication on the
camera. Closes the [Password setting]
screen without saving the password setting.
D
E
Description