Led State Page - JVC LST0886-001A Instructions Manual

LED State Page

This page is for setting the method for lighting the [STATUS] indicator on this camera.
This page can be used during access using AadminB or AoperatorB.
● Click [Advanced Settings] to display setting menu.
● Click [LED State].
● Press the [OK] button to enable the new settings.
Click
A
LED State
B
Identify Unit
For selecting whether to light up the [STATUS] indicator on this camera
when it is running.
Enable : Lights up when unit is running.
Disable : Turns off the indicator after startup is complete.
If you want the [STATUS] indicator on this camera to blink such as during
visual check of the camera currently being configured from the computer, set
this item to ABlinkB.
Memo:
● The light of the indicator remains off when the LED State is set to
ADisableB even if ABlinkB is set.
A
B
55