Led State Page - JVC VN-X35U Instructions Manual

LED State Page

This page is for setting the method for lighting the [STATUS] indicator at the side of VN-X35U.
This page can be used during access using AadminB or AoperatorB.
● Click [Advanced Settings] to display setting menu.
● Click [LED State].
● Press the [OK] button to enable the new settings.
Click
A
LED State
B
Identify Unit
For selecting whether to light up the [STATUS] indicator of this unit when it is
running.
Enable : Lights up when unit is running.
Disable : Turns off the indicator after startup is complete.
If you want the [STATUS] indicator to blink such as during visual check of the
camera currently being configured from the computer, set this item to ABlinkB.
Memo:
● The light of the indicator remains off if the LED State is set to ADisableB.
A
B
75