JVC LST0886-001A Instructions Manual page 13

B
Select the [Time Zone].
C
Click [OK].
3 A confirmation screen appears
Click [OK].
Camera restarts using the new IP address. It takes about one minute for the camera to reboot.
Memo:
● Access from the connected computer may fail when the IP address of the camera is changed. To
enable access to camera from the same computer, alter the IP address at the computer accordingly.
When the display or configuration of the opened screen appears strange, check
using the following procedures.
A
[Start] [Control Panel]
-
Click
B
[Settings]
Click the
C
[DPI setting]
Check that
D
Otherwise, change the setting to
[Display]
-
and open the
[Display Properties]
tab in the
[General]
in the tab has become
[Normal size (96DPI)]
[Display Properties]
[Advanced]
windows and click the
[Normal size (96DPI)]
and reboot windows
window
button
13