JVC LST0886-001A Instructions Manual page 69

(TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only.
B
Back Light
Compensation
Mode
B
Easy Day and Night
VN-V25U, VN-X35U only
Mode
C
B&W Mode
VN-V26U, VN-V225U
series, VN-X235U
series only
Mode
C
Focus Assist
Mode
For selecting the backlight compensation feature. Set this feature when there
is a bright light source in the same direction as the object. Enables unwanted
light sources to be excluded from the photometry area.
Off : Disables backlight compensation.
Area1 to 4 : For selecting a photometry area from the four available types.
Photometry Photometry
Area
Off Area1
Memo:
● The backlight compensation area is not linked to digital PTZ (TX).
[Set values: Off, Area1, Area2, Area3, Area4]
For specifying Easy Day and Night .
Color : Sets to the color mode at all times.
Black and White : Sets to the black-and-white mode at all times.
Auto : Image color switches to black-and-white when the
luminance level is low.
Memo:
● The threshold of the Auto switching cannot be changed.
[Set values : Color , Black and White, Auto]
For specifying whether to switch the image to the B&W mode. Auto mode can
be specified for switching automatically to the Black and White mode when
the luminance level is low. In auto mode one of three levels can be selected
according to the luminance level.
Color : Switches to the color mode at all times.
Black and White : Switches to the black-and-white mode at all times.
Auto Low : Switches to the black-and-white mode when the
luminance of the signal level of the object is low.
Auto Mid : Switches to the black-and-white mode when the
luminance of the signal level of the object is medium.
Auto High : Switches to the black-and-white mode when the
luminance of the signal level of the object is high.
[Set values : Color, Black and White, Auto Low, Auto Mid,Auto High ]
Memo:
● The infrared filter engages and disengages when switching between modes,
which causes mechanism noise.
● During the occurrence of mechanism noise, the distribution sound from the
camera will be muted. (VN-V26U only)
● When AAuto LowB, AAuto MidB or AAuto HighB has been selected the camera
will change the mode immediately according to the luminance level.
If [Execute] button is clicked, [Current State] will change to [Focus Assist] and focus
assist mode is enabled. If [Stop] button is clicked, [Current State] will change to
[Normal] and focus assist mode is disabled.
Memo:
● Focus assist mode will be disabled after 3 minutes if left unattended.
Photometry
Area Area
Area2
Photometry Photometry
Area Area
Area3 Area4
69