Operator Password - JVC LST0886-001A Instructions Manual

Operation
Operation of Built-in Viewer
(continued)

Operator Password

(TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only.
Follow the procedures below to configure the operator password required for sending/receiving audio
sound or PTZ operation.
● This page can be used during access using AadminB or AoperatorB.
● When a different menu is currently being displayed, click [Viewer Setup] to switch the menu.
● Click the menu bar on the left side of the screen to open the setting screen.
● Click the [Apply] button to activate the settings in the Viewer. The settings will be saved on the
computer.
A
A
Operator Password
Operator
Password
80
Click
Follow the procedures below to configure the operator password
required for sending/receiving audio sound (This feature is not available
in VN-V25U) or PTZ operation (TX).
Enter the password of "operator" authority. Enter the password that is set
on the Password Page. (A Page 53)