JVC LST0886-001A Instructions Manual page 33

H
Mail
I
TCP/UDP
J
Alarm Output
Duration
K
Time Filter
Mail Address : For entering the recipient's mail address.
Mail Text : For entering the mail transmission data. Input up to 127
alphanumeric characters.
Attach Image : For specifying whether to attach images to the mail.
TCP/UDP IP Address
TCP/UDP Port Number : For entering the port number when alarm action
TCP/UDP Data
For setting the alarm output time from the alarm output terminal.
When this is set to "0", it is not possible to revert back to break (or make)
after changing to make (or break).
[Setting range: 0, 100 msec to 5000 msec]
For specifying the alarm action with respect to each day of the week and
setting the corresponding time of the day.
Applicable day of week
Alarm action
Unmask Span
Mask Span
Unmask All
Mask All
Applicable time period
: For entering the address when alarm action
notification is to be sent via TCP or UDP.
(IP or FQDN)
notification is to be sent via TCP or UDP.
(1 to 65535)
: For entering the data to send during TCP or UDP
notification. Input up to 127 alphanumeric
characters.
: Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday
: For specifying the time period for invoking the
action
: For specifying the time period to stop the action
: Activated at all times
: Stopped at all times
: For specifying the start and end time in hours
and minutes.
33