Jvc Api For Led Setting - JVC VN-H37 Manual

WEB setting page. Refer to the instruction manual for details on the Maintenance page.
Restart the Camera
Format /api/param?system.status=restart
Example of Response system.status&200 OK
Interpretation Restarts the camera.
Allowed users admin
Initialization
Format /api/param?system.status=initialize
Example of Response system.status&200 OK
Interpretation Restore all the camera settings to factory defaults. Upon doing so, all transmission services that
are in progress will be terminated. Initializing takes a few minutes. Response is returned after initializing. Do not
power off during initializing.
Allowed user admin
Firmware Update
Version upgrading is not possible using API. To do so, use the Version Upgrade feature on the Maintenance page
of the WEB setting page.

26. JVC API for LED Setting

The APIs below are related to LED. These are equivalent to the features on the LED page of the WEB setting
page. Refer to the instruction manual for details on the LED page.
Getting LED mode
Format /api/param?camera.stealth
Example of Response camera.stealth=off&200 OK
Interpretation Acquire LED setting. "on" or "off" is returned. If thie is "on", LED becomes off after restarting.
Allowed users admin, operator, user
Setting LED mode
Format /api/param?camera.stealth=data
Example /api/param?camera.stealth=on
Example of Response
camera.stealth&202 Accepted(camera.status=save)
8 7