Ip Address Setting For The Camera - JVC LST0886-001A Instructions Manual

Network Settings
IP Address Settings
(continued)

IP address setting for the camera

1
Click [Details] of the camera Built-in viewer
2
The [Basic Settings1] screen appears
C
Click
A
Set the [IP Setting].
● When selecting ADHCP DisableB:
Select ADHCP DisableB, and specify a value in the [IP Address], [Subnet Mask] and [Default
Gateway] fields.
● When selecting ADHCP EnableB:
The default setting is ADHCP DisableB (DHCP client function is Disabled). To assign an IP
address from the DHCP server, connect the DHCP server to the LAN, set the AIP SettingB of the
camera to ADHCP EnableB, and click the [OK] button. For details on IP addresses assigned to
the camera, consult your network administrator.
Note:
● Set the DHCP server such that the same IP address is always assigned to the MAC address of the
camera by the DHCP server. Connection may fail if the above setting is not performed.
12
Click
A
Set the [IP Setting] item to
[DHCP Disable].
Enter the values you wish to
specify in the [IP Address],
[Subnet Mask] and [Default
Gateway] fields.
B
Select the [Time Zone].