Basic Settings1 - JVC LST0886-001A Instructions Manual

Basic Settings1

This page is for performing basic setting related to the network.
This page can be used during access using AadminB.
● Click [Basic Settings1].
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Click
Memo:
● You can open the [Basic Settings1] screen without going through the built-in viewer by entering the
following URL address (
● Enter the model name in lowercase letters.
VN- V225U series is displayed :
（Example）
http://192.168.0.2/cgi-bin/ v225 display.cgi? v225 basicmenu1.html
Network
A
IP Setting
B
IP Address
C
Subnet Mask
D
Default Gateway
Time
E
Time
F
Time Zone
G
PC Time to Camera
contains model name) in the address field of Internet Explorer.
For setting the DHCP client function.
Connect camera to a network environment with a DHCP
server when DHCP is to be enabled. If the DHCP server does
not exist when [IP Setting] is set to ADHCP EnableB, camera
will start running with the 192.168.0.2 IP address and
255.255.255.0 subnet mask in about 2 minutes after startup.
(A Page 6)
For setting the IP address of camera.
For setting the subnet mask of camera.
For setting the default gateway of camera.
Enter 0.0.0.0 if you do not want to set a default gateway.
Displays the clock time of camera.
The time transmitted by camera is recorded in the JPEG
header. Discontinuity may occur in the JPEG header's time
immediately before and after changing the time.
For setting the time zone.
Click the [Set] button to set the time of the computer on
camera.
A
B
C
D
E
F
17