Table of Contents
Advertisement
Plast Coat 25 · 35
4.6
SPRAy lANCe WItH AutOMAtIC CONtROl (FIG. 8)
1
Material connection
2
Switch sleeve, switching the mortar spraying machine on
and off using remote control
3
Texture nozzle
4
Air tap
5
Material tap
6
Remote control connection
7
Atomization air connection
7
6
5
Various different texture nozzles can be fitted to the spray
lance, see accessories page 48, item 1.
The size of the nozzle depends on the grain size of the coat-
ing material and the required spraying pattern.
4.7
SPRAy lANCe WItHOut AutOMAtIC CONtROl
(FIG. 9)
1
Atomization air connection
2
Air tap
3
Texture nozzle
4
Material tap
5
Material connection
5
1
2
4
1
2
4
3
Various different texture nozzle can be fitted to the spray
lance, see accessories page 48, item 1.
The size of the nozzle depends on the grain size of the coating
material and the required spraying pattern.
5
tRANSPORt
• Moving the mortar spraying machine on its wheels:
Hold the fold-out handles (1, fig. 10), lift and move.
• Carrying the mortar spraying machine:
Hold the fold-out handles (1) and front bar (2) and lift.
5.1
tRANSPORt uSING A CRANe
For attaching points for the straps or rope (not wire cable) see
figure 10.
3
1
GB
transport
2
33
Advertisement
Table of Contents
