TABLE OF CONTENTS SPECIFICATIONS………………………………………….. Page 1 KNOW YOUR PRODUCT…………………………………. Page 1 INTRODUCTION………………………………………….. Page 3 ELECRICAL SAFETY………………………………………. Page 3 GENERAL POWER TOOL SAFETY WARNINGS………… Page 4 ADDITIONAL SAFETY INSTRUCTIONS FOR MULTI FUNCTION TOOLS………………………………. Page 6 LITHIUM ION BATTERY AND CHARGER SAFETY FEATURE………….……………………………… Page 7 CHARGING THE LITHIUM ION BATTERY……………….
Function Tool. We aim to provide quality tools at an affordable price. We hope you will enjoy using this tool for many years. Your Lithium Ion Multi Function Tool MFT-012 has been designed for sanding, chiselling, cutting and many additional applications and is intended for DIY use only.
ELECTRICAL SAFETY (cont.) • Never attempt to connect 2 chargers together. • DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 40ºC (such as outside sheds or metal buildings in summer). •...
Page 6
General Power Tool Safety Warnings - Personal Safety e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
General Power Tool Safety Warnings - Personal Safety e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
LITHIUM BATTERY AND CHARGER SAFETY FEATURES Over Charging Protection This feature ensures that the battery is never overcharged. When the battery has reached it’s full charge capacity the charger will shut off protecting the internal components of the battery from being damaged. Over Discharge Protection An internal component of the battery pack is an over discharge protector.
CHARGING THE LITHIUM ION BATTERY The multi function tool has been shipped in a low charge condition, and requires charging prior to use. Initial Charging • Insert the charger jack (17) into the charging cradle (16) (see Fig. 1 Fig. 1). Plug the charger adaptor (15) into a 240V power outlet. Ensure that the charging cradle (16) is on a flat surface.
INSTALLING OR REMOVING THE BATTERY Always switch off the multi function tool before insertion or removal of the battery (3). Installing the Battery Fig. 2 • Holding the multi function tool upright and picking up the battery (3) in your opposite hand.
ASSEMBLY Attaching Your Accessory Accessory Drive Spindle fixed 1. To attach an accessory to the Multi Function Tool, to the Multi Function Tool ensure that the large hole located within the series of smaller perforated holes on the accessory is correctly placed over the raised locating ring on the accessory drive spindle (6) of the Multi Function Tool.
OPERATION Operating the On/Off Switch Fig. 7 1. Slide the on/off switch (1) forward to the "on" position (Fig. 7). 2. Slide the on/off switch (1) towards the back of the Multi Function Tool to the "off" position. Adjusting the Variable Speed NOTE: In various applications you will need to select Fig.
Page 13
OPERATION (cont.) Sanding NOTE: Ensure you have the correct sanding paper for your application. Always test on a scrap workpiece before using on your workpiece. 1. In sanding mode, the Multi Function Tool can be used on materials such as wood, plastic, metal and painted surfaces.
Page 14
OPERATION (cont.) Sawing – Square Blade CAUTION: Clamp your workpiece securely if possible before commencing your work. NOTE: Ensure your blades are not blunt or damaged in any way before commencing your application. 1. In sawing mode, the Multi Function Tool can be used on wood, plastics and sheet metal.
Multi Function Tool into a liquid. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
SPARE PARTS Limited spare parts are available subject to availability. Please contact your local Bunnings Special Orders Desk to order the required spare parts. Most common spare parts listed below Spare Part Part No. Inner Flange SPDMP012-18 Locking Screw & Washer SPDMP012-21A 12V Battery Pack SPLIR012-06...
DESCRIPTION OF SYMBOLS Volts Hertz Alternating current Watts ø Direct current Diameter Milliamperes No load speed Revolutions or Electrical Emissions reciprocation per minute Conformity (EMC) Read instruction manual Warning Indoor use only Double insulated Isolation transformer Polarity Thermal cut-out Transformer Energy protection at 130ºC Rating (MEPS) Do not use or store battery in...
DATE PURCHASED: ________________________________________________ 3 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do it yourself) use only. The Lithium Ion battery is covered by a 12 month warranty.
Need help?
Do you have a question about the MFT-012 and is the answer not in the manual?
Questions and answers