Ozito MFR-2200U Original Instructions Manual
Ozito MFR-2200U Original Instructions Manual

Ozito MFR-2200U Original Instructions Manual

Multi function tool 300w

Advertisement

Quick Links

MULTI
FUNCTION
TOOL
300W
ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Motor:
300W
Input:
230-240V ~ 50Hz
No Load Speed:
15,000-21,000 opm
Orbit Angle:
3.2°
Sanding Pad Size:
92 x 92 x 92mm
Weight:
1.43kg
ozito-diy.co.uk
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectification of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
OZITO UK
Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
WARRANTY
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts, for example: carbon brushes, blades, sanding
paper, etc. Guarantee claims should be submitted before the end of
the guarantee period within two weeks of the defect being noticed. No
guarantee claims will be accepted after the end of the guarantee period.
The original guarantee period remains applicable to the device even if
repairs are carried out or parts are replaced. In such cases, the work
performed or parts fitted will not result in an extension of the guarantee
period, and no new guarantee will become active for the work performed or
parts fitted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
WHAT'S IN THE BOX
Multi Function Tool
Sanding Pad & Paper x 15
Dust Collection
Accessory
Scraper & Triangular
Rasp
Straight Blade x 2
Semi Circular Blade
Grout Removal Disc
MFR-2200U
0616

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MFR-2200U and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito MFR-2200U

  • Page 1: Specifications

    1.43kg ozito-diy.co.uk Semi Circular Blade Grout Removal Disc MFR-2200U WARRANTY All of our products undergo strict quality checks to ensure that they reach - Damage to the device or parts of the device caused by normal or natural you in perfect condition. In the unlikely event that your device develops a wear or tear or by normal use of the device.
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION MULTI FUNCTION TOOL 1. ASSEMBLY 1. Accessory Drive Spindle 4. Rear Handle 2. Side Handle 5. Variable Speed Dial Accessory Fitment 3. On/Off Switch 1. Place accessory over the drive spindle and position to suit angle needed for application.
  • Page 3: Operation

    OPERATION 2. CONTROLS Fitting the Dust Collection Accessory CAUTION: THE POWER SUPPLY FOR THIS PRODUCT SHOULD BE PROTECTED BY A RESIDUAL CURRENT The dust collection adaptor can be fitted to your multi function DEVICE (RATED AT 30mA OR LESS). tool to reduce the build up of dust and debris while operating. Accessories must be removed prior to fitting the dust collection On / Off Switch accessory.
  • Page 4 2. Use slight pendulum motion when cutting. Note: Periodically turn the Note: Periodically turn the unit off and remove any built-up unit off and remove any dust and debris. built-up dust and debris. MFR-2200U...
  • Page 5: Troubleshooting

    Always replace both carbon brushes at the same time. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the multi function tool by an unauthorised person...
  • Page 6: Electrical Safety

    ELECTRICAL SAFETY Before you connect the equipment to the mains supply make sure that the data on the rating plate are Note: Double insulation does not take the place of normal safety precautions when operating this tool. identical to the mains data. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool.
  • Page 7 Please note that the following parts of this product are subject to normal or natural wear and that the the following product Additonal operating & safety instructions Multi Function Tool following parts are therefore also required for use as consumables. Multi Function Tool MFR-2200U (OZITO) Category Example Wear parts*...
  • Page 8 Items supplied Danger! Caution! Please check that the article is complete as Sound and vibration Residual risks specifi ed in the scope of delivery. If parts are Sound and vibration values were measured in Even if you use this electric power tool in ac- missing, please contact our service center or the accordance with EN 60745.

Table of Contents