Ozito ZLGGS-012 Instruction Manual
Ozito ZLGGS-012 Instruction Manual

Ozito ZLGGS-012 Instruction Manual

12v lithium ion cordless glue gun

Advertisement

Quick Links

CORDLESS
GLUE GUN
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
12V
Glue Stick Size
Ø7.2 x 190mm
Heating Time:
10 sec
Max Heating Temp:
170°C
Weight:
0.24kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

WARRANTY

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 12 month warranty. Warranty excludes
consumable parts, for example: accessories etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WHAT'S IN THE BOX
Cordless Glue Gun
3 x Glue Stick
ZLGGS-012
1017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZLGGS-012 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito ZLGGS-012

  • Page 1 170°C Weight: 0.24kg ozito.com.au 3 x Glue Stick ZLGGS-012 WARRANTY The benefits provided under this warranty are in addition IN ORDER TO MAKE A CLAIM UNDER THIS to other rights and remedies which are available to you at law. WARRANTY YOU MUST RETURN THE PRODUCT...
  • Page 2 8 Glue Stick x 3 ( Ø7.2mm x 190mm ) BATTERY & CHARGER This tool is compatible with all batteries and chargers from the Ozito Home-12volt range. ONLINE MANUAL Scan this QR Code with your mobile device to take you to...
  • Page 3 OPERATION 2. LOADING THE GLUE STICK 3. SWITCHING THE GLUE GUN ON Switching the Glue Gun On WARNING! ENSURE THE TOOL IS SWITCHED OFF AND ALLOWED TO COOL DOWN BEFORE PERFORMING ANY OF THE FOLLOWING TASKS. 1 Hold the on/off switch down for roughly 3 seconds to start the glue gun.
  • Page 4 15 seconds for a strong bond. 3 To stop the flow of glue from the gun, release the trigger flow control. WARNING! DO NOT ALLOW HOT GLUE TO COME IN CONTACT WITH PRODUCT HOUSING DURING USE. ZLGGS-012...
  • Page 5 Diameter any part of the glue gun into liquid. Milliamperes Amp hour Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the glue gun by an unauthorised person Regulator compliance or by mishandling.
  • Page 6 ELECTRICAL SAFETY WARNING! The power supply for this product should be protected by a residual current device (rated at 30mA or less). A When using mains-powered tools, basic safety precautions, including the residual current device reduces the risk of electric shock. following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage.

Table of Contents