Installation Advice; Side-By-Side Installation; Location - Miele KWT 6321 UG Operating And Installation Instructions

Installation advice

This appliance must be built in,
otherwise it could tip up. To avoid a
hazard, it must be fixed in
accordance with the instructions.

Side-by-side installation

To avoid a build-up of condensation
and resultant damage, refrigerators and
freezers should not generally be
installed directly next to other such
appliances.
However, this wine conditioning unit
can be installed side-by-side with
another underbench wine conditioner.
Please contact Miele for information
on which combinations are suitable
for your appliance.
38

Location

This appliance should not be installed
where it is exposed to direct sunlight or
directly adjacent to a heat-producing
appliance such as an oven or a
radiator. The room temperature should
not go above or below the climate
range for which the appliance is
designed. The higher the ambient
temperature of the room, the more
energy the appliance requires to
operate. The appliance should be
installed in a dry, well-ventilated room.
When installing the appliance, please
be aware:
– The mains connection socket must
not be located directly behind the
appliance and must be easily
accessible.
– The plug and mains connection
cable must not come into contact
with the rear of the appliance as they
may be damaged by vibrations from
the appliance.
– Nor should other appliances be
plugged into a socket located
directly behind this appliance.