Ventilation Cut-Out; Door Seals; Air Filter - Miele KWT 6321 UG Operating And Installation Instructions

Cleaning and care
^ To clean stainless steel surfaces on
the appliance, use the Original Miele
ceramic and stainless steel cooktop
cleaner. This product contains
substances that are gentle to
stainless steel surfaces and, unlike
stainless steel cleaners, it does not
contain polishing agents.
^ Each time you clean the stainless
steel surfaces of the appliance you
should apply the Original Miele care
product for stainless steel.
This will give them a water and dirt
repellent protective coating and help
prevent resoiling.
^ Clean the appliance door with a
proprietary glass cleaner.

Ventilation cut-out

^ Clean the ventilation cut-out under
the plinth strip with a brush or
vacuum cleaner. A build-up of dust
will increase the energy
consumption.
30

Door seals

Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.

Air filter

Clean the air filter behind the ventilation
grille with a vacuum cleaner at least
once a year. Remove the air filter and
vacuum it thoroughly on both sides. A
dirty filter can prevent the appliance
from cooling sufficiently.
After cleaning
^ Refit all shelves and accessories in
the appliance.
^ Reconnect the appliance to the
electricity supply and switch it on.
^ Place the wine bottles back in the
appliance and close the door.