Miele KWT 6321 UG Operating And Installation Instructions page 43

^ Take off the upper retaining bracket
e and fit it to the opposite side.
^ Remove the retaining bracket at the
bottom right f of the appliance and
fit it to the bottom left.
Make sure the drill holes match up.
Changing the door hinging
^ Remove the hinge bracket at the top
g and the cover cap h on the
opposite side.
^ Push out the bushing.
^ Switch the positions of the cover cap
and bushing.
^ Unscrew the bottom hinge bracket
i.
^ Remove the washer from the hinge
pin and from the screw.
43