Filling/Bleeding The Cooling System - KTM 990 Adventure EU Owner's Manual

COOLING SYSTEM

Filling/bleeding the cooling system

14.4
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
–
Place a suitable container under the radiator.
–
Remove screw
–
Remove radiator cap.
–
Completely drain the coolant.
–
Mount screw
Guideline
Remaining chassis screws
100612-10
–
Place a suitable container under the engine.
–
Remove screw
–
Completely drain the coolant.
–
Mount screw
Guideline
Screw, water pump cover
100611-10
x
.

with a new seal ring and tighten it.

.

with a new seal ring and tighten it.

M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
151