Installing The Front Side Cover - KTM 990 Adventure EU Owner's Manual

SERVICE WORK ON THE CHASSIS

Installing the front side cover

10.7
Info
The operations are the same on the left and right sides.
–
Remove screws
–
Carefully swing out the side cover
of the turn signal cables.
–
Pull off the overflow hose of the fuel tank and take off the trim.
100589-10
–
Position side cover
–
Attach the overflow hose of the fuel tank to the connector.
–
Connect the plug-in connectors of the turn signal cables and swing the side cover up
toward the vehicle.
–
Mount and tighten screws
Guideline
Remaining chassis nuts
100589-11
–
Check the function of turn signal.
.

at the top and disconnect the plug-in connectors

at the fuel tank on the bottom and hold it at an angle.

with the washers.

M6 15 Nm
(11.1 lbf ft)
80