6-12 CYLINDER, PISTON AND EXHAUST VALVE
EXHAUST VALVE GOVERNOR REMOVAL
AND DISASSEMBLY
• Drain transmission oil. (2-9)
• Drain engine coolant. (12-3)
• Remove the exhaust pipe. (5-3, -4)
• Remove the exhaust valve rod bolt. (6-4)
• Remove the right crankcase cover. (8-3)
• Remove the exhaust valve governor 1.
• Remove the exhaust valve rod assembly 2.
• Remove the pin 3 by pushing down the retainer 4.
• Disassemble the following parts from governer.
1 Governer
3 Pin
4 Retainer
5 Spring
6 Retainer
7 Bearing
8 Washer
9 Spacer
0 Washer
A Bearing
B Stater
C Balls